Ultrasonic Switches
Ultrasonic switches are a cost-effective solution for your applications. Installation requires
mounting the sensor (threaded or flanged) to the vessel, connecting the power and control wires,
and applying power. There is no additional set-up or calibration required. Since it is an electronic instrument with no moving parts, preventive maintenance is limited to an annual visual
inspection. The only recommended spare part is the “board” at a quantity of one board for every
10 units. A technician with basic electrical skills (wiring) can service the instrument.Why use an ultrasonic switch ove
mounting the sensor (threaded or flanged) to the vessel, connecting the power and control wires,
and applying power. There is no additional set-up or calibration required. Since it is an electronic instrument with no moving parts, preventive maintenance is limited to an annual visual
inspection. The only recommended spare part is the “board” at a quantity of one board for every
10 units. A technician with basic electrical skills (wiring) can service the instrument.Why use an ultrasonic switch ove
更多详情
Ultrasonic Switches
Ultrasonic switches are simple to apply and use. There are only a few limitations to their use:
The media must be liquidProcess temperature between -40 and 250oF (-40 to 121oC)
The media must have less than 5% suspended solids
No aeration in fluids with a viscosity of 100cP (30W motor oil) or greater
The following chart will assist you in selecting the right product for your application.
cription="" style="margin: 0px; padding: 0px; border: 0px; line-height: 1; font-family: inherit; max-width: 100%; vertical-align: middle;" />
